Product:
Styrene-acrylic washable paint for interiors.
Top quality acrylic paint that gives the treated surfaces a satin appearance and high washing resistance. Accurately formulated, easily applied and very high yield.
For interior surfaces such as cement, gypsum, plasterboard and two-coat plaster.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [AM-ID-LAV010]
- AMBIENTI
- WATER-BASED PAINTS
- washable to internal and/or external
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) Mano unica - lavabile max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colourants or with the "ChròmaSystem" colouring system.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷7m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: make sure the surface to be painted is perfectly dry, clean and cured for a period of 28 days in normal temperature and relative humidity conditions. Proceed with applying a coat of "FIXCIPIR" fixative, after at least 6 hours apply the first coat of Mano unica - lavabile. After 24 hours, the second coat of the product can be applied.
On already painted substrates: accurately clean the surface, removing any traces of old peeling paint, fill cracks and small imperfections with "MASTICFAS" and then apply a coat of "FIXCIPIR" fixative. After at least 6 hours, apply the first coat of Mano unica - lavabile. After 24 hours, the second coat of the product can be applied.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 3000 ml()
- 5000 ml()
- dim. mm(PxLxH)pz.imballo
- 235x152x1302
- 211x211x2101
