Product:
Transparent varnish with glossy finish with a urethane base and single-components that can be diluted in nitro solvent.
Suitable for use on wooden flooring for its high tread and scratch resistance, maintaining its initial shine for a long time.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [CH-IM-FNS107]
- CHROMA
- PRIMERS AND FINISHES FOR WOOD
- synthetic finishes
- Rev.: 4.0 - 14/12/2021
Can be diluted with nitro solvent. The product cannot be mixed.
Store the product at temperatures no lower than 1°C out of direct sunlight.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 5÷7%. To apply with a wool roller, dilute at 7÷8%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: It is important that the mineral substrates to be painted are perfectly clean, dry and dusted.
In the case of wooden flooring, the substrate must not have any traces of old varnish and must be prepared by sanding accurately.
WARNINGS: Mix the product well before use.
- barcodeformatocolore
- 1000 ml()
- 5000 ml()
- dim. mm(PxLxH)pz.imballo
- 109x109x1326
- 190x190x2401
