Product:
Plioliite resin based solvent paint
Based on Pliolite and synthetic resins and has resistance properties to alkalis, atmospheric agents and to mould. Excellent self-washing, breathability and water-repellent characteristics
Very easy to apply with both a brush and a roller.
It is used on new or already painted exterior surfaces, on plaster, reinforced concrete, fibre-cement panels, etc.
Indicated for architectural complexes in which recovery and restoration have an excellent result, using this paint. Excellent indoors for repairing surfaces stained by damp or by soot.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [CH-PS-SIE110]
- CHROMA
- SPECIAL PAINTS
- synthetic inner and outer
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture monocomponenti ad alte prestazioni (Cat A/i) BS 500 gr/lt (2013) RepiolCipir max contains 500 gr/lt di VOC
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 4÷5m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a spray, dilute at 20÷25% for the first coat and 15÷20% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: make sure the plaster has reached a curing of at least 28 days, check that the surface is completely dry and apply a first coat of "FIXCIPIR" sealing fixative. After at least 24 hours, the first coat of RepiolCipir can be applied. After at least 24 hours, the coat can be applied.
On already painted substrates: clean the substrate well, removing all the old parts of paint that are not perfectly adherent to the surface or are peeling. After checking that the surface is perfectly dry and dusted the first coat of "FIXCIPIR" base can be applied. After at least 24 hours the first coat of RepiolCipir can be applied, followed after at least 24 hours by the second coat.
WARNINGS: Mix the product well before use. To apply outdoors it is recommended to protect the treated surface from humidity and rain for at least 48 hours after applying the product.
- barcodeformatocolore
- 500 ml()
- 2500 ml()
- 17 lt()
- dim. mm(PxLxH)pz.imballo
- 109x109x856
- 165x165x1602
- 292x292x3641
- barcodeformatocolore
- 500 ml()
- 2500 ml()
- 17 lt()
