Product:
Glossy semi-transparent acrylic finish that is washable for interiors.
Wall paint with particular water repellent, breathability and filling power characteristics. Composed of acrylic resins, titanium dioxide and crystalline mineral fillers, with the addition of special anti-bacterial, non-toxic products.
On internal and external walls as it does not peel or absorb water and lets the internal humidity breathe. In interior rooms in which there is a high rate of humidity in the ambient, such as bathrooms and kitchens, as it limits the formation of mould.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [CH-ID-TRA116]
- CHROMA
- WATER-BASED PAINTS
- breathable interior
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) Velostil 4P max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colourants.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷8 m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: make sure the surface is perfectly dry, clean and dusted. Proceed with applying the first coat and after at least 12 hours, in normal environmental conditions, the second coat of Velostil 4P can be applied.
On already painted walls: clean the substrate to be painted well, remove any traces of old peeling paint and fill any imperfections. Apply the first coat of product diluted as indicated. After at least 12 hours in normal environmental conditions, apply the second coat of the product.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 14 lt()
- dim. mm(PxLxH)pz.imballo
- 302x302x2921
