Product:
Acrylic paint with added hollow glass microspheres giving it thermal insulation properties.
The thermal insulating properties are explained in a type of double glazing effect, which to the touch gives a sensation of warmth and softness. It is able to retain heat in the winter and cool in the summer in the rooms in which it is used. Thanks to the action of the powerful fungicidal agents in it, it resolves the problem of mould formation.
Particularly suitable to complete cycles of coating and finishing for insulation systems.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [BM-ID-SPE133]
- BRICOMAN
- WATER-BASED PAINTS
- special internal and/or external
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) BigWork - Thermoisolante max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colourants.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original package, keeps for a period of 1 year.
On surfaces treated with sealers and/or suitable bases, the product covers 3÷5m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 4÷6 hours and can be painted over after 8 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: make sure the surface is perfectly dry, clean and the plaster has cured and apply a base coat of ("FIXCIPIR" fixative or "LACCA 140W"). After 24 hours, apply the first coat of BigWork - Thermoisolante. After a further 24 hours, in normal temperature and relative humidity conditions, apply the second coat of the product.
On old or previously painted substrates: accurately clean the substrate by brushing, sanding and, in the case of particularly damaged surfaces, hydro sandblasting. Once it is clean, you can proceed in applying the "FIXCIPIR" base fixative or "LACCA 140W"). After at least 24 hours, apply the first coat of the product. To conclude, apply the second coat after a further 24 hours.
To obtain a heat insulating and anti condensation is required the preparation of the product with a film thickness of at least 200 ÷ 300 microns.
WARNINGS: Mix the product well before use. To apply outdoors it is recommended to protect the treated surface from humidity and rain for at least 48 hours after applying the product.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 15 lt()
- 25 lt()
- dim. mm(PxLxH)pz.imballo
- 305x305x2851
- 300x300x4251
