Product:
Ecological acrylic fixative for interiors, Ecolife. Odourless and very low release of volatile organic compounds (COV).
Hydrofix is suitable to be used on any type of wall. It is particularly recommended for the preparation of bases to finish with water-based paints of absorbent surfaces such as two-coat plaster, reinforced cement, gypsum and plasterboard, on which it evens out the absorption.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [EL-FF-ISA148]
- ECOLIFE
- PRIMERS AND TOPCOATS
- insulating acrylic
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Primer fissanti (Cat A/h) BA 30 gr/lt (2013) Hydrofix max contains 30 gr/lt di VOC
Can be diluted with water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The product covers 5÷6 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
It must be diluted according to the porosity of the substrate to be treated, however with no addition of water in a quantity over 3 times the product.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷4 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: The surfaces to be treated must be clean, dry, dusted and without any oily substances. In the case of old, previously painted surfaces, you must remove any residue of old, peeling paint by sanding or brushing. Once the preparation is finished you can apply a coat of Hydrofix, diluted as indicated.
WARNINGS: During use, take minimum safety precautions.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- 4000 ml()
- dim. mm(PxLxH)pz.imballo
- 83x83x2406
- 135x190x2451
