Glossy semi-transparent acrylic finish that is washable for interiors.
Washable water-based enamel, based on acrylic resins, pigments and ecologic additives, practically odourless and can be also used in closed and poorly ventilated areas without causing the formation of noxious or annoying odours.
The product is generally ready to use but if it is necessary to reduce the viscosity in certain cases, it can be diluted with water up to a maximum of 10÷12%.
Suitable to use on all types of interior metal radiators.
Can be diluted with water. Can be mixed with the chart colours.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷7m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush or roller, dilute at 5÷7%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new radiators: check the substrate is perfectly clean, dry, degreased and dusted and then apply a base coat of "METALFOND". After at least 18 hours, apply the first coat of Thermosmalto. The second coat of Thermosmalto can be applied after a further 18 -24 hours.
On already painted radiators: clean by sanding and remove any old flaky paint, treat the peeled parts with "METALFOND" and apply the first coat of Thermosmalto. The cycle can be concluded with the application of the second coat after at least 18 hours.
WARNINGS: Mix the product well before use.
NOTE: Ideal ambient conditions: temperature: min. +8°C max. +30°C relative humidity <70%. Ideal substrate conditions: temperature: min. +5°C max. +30°C - humidity <10%. It is recommended to apply the product in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.