Product:
High strength masonry hydraulic binder.
Hydraulic binder consisting of silicates and calcium aluminates, calcium carbonate, pozzolana and additives that improve the workability. Product complies with the UNI 10892-1 standard for hydraulic binders for building and is classified as LIC 3.0.for finishing mortars and substrates and traditional plaster.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [HQ-PL-CMC164]
- HIGH QUALITY
- POWDERS AND STUCCO
- cement and lime
- Rev.: 4.0 - 14/12/2021
Can be mixed with water and aggregate products.
Keep in a dry and ventilated place. The product, sealed in the original package keeps for a period of one year.
Any package residue must be disposed of, according to local regulations in force.
Mix with water until you obtain an even a homogeneous and malleable mixture.
Useful life of the mixture (at 22°C and relative humidity at 60%) is around 3 hours. Average hardening time 3 to 5 days.
Use at ambient temperatures between 5°C and 30°C.
CYCLE: The substrate must be free of dust and oily and greasy substances. With a hot, dry climate, it is advisable to moisten the surface before applying.
WARNINGS: In the summer, protect the mortar from fast drying with suitable protection and where needed, moisten bricks or blocks before applying.
Do not apply to substrates that are frozen, thawing or with frost risk in the 24 hours after applying.
Using an excessive amount of mixing water determines the reduction of mechanical strength and the increase in hydraulic shrinkage of the hardened mortar.
- barcodeformatocolore
- 5000 g()
- dim. mm(PxLxH)pz.imballo
- 200x125x2652
