Grey powder adhesive for insulating panels.
Premixed dry glue consisting of: high strength Portland cement, selected sands and additives that improve workability and adhesion.
For the application through binding insulating panels made of sintered expanded polystyrene panels (EPS) expanded polystyrene (ICB), expanded cork (ICB) and rock wool (MW);
Can be mixed with water. The product cannot be mixed with other products.
Keep the place dry and ventilated. The product, stored and sealed in the original package in a dry and airy place, keeps for a period of 6 months.
On normal surfaces, 3÷5 kg of product per m² is generally needed.
Any package residue must be disposed of, according to local regulations in force.
Mix with a low-speed mixer, adding water to the insulation glue in the percentage of about 27% until a homogeneous mixture is obtained.
The useful life of the mixture (at 22°C and relative humidity at 60%) is about 60 minutes. The complete average hardening time is 28 days, but the panel can be already smoothed after 3 days.
Use at ambient temperatures between 5°C and 30°C.
CYCLE: Make sure that the substrate is clean, free of oily and greasy substances, dust and without irregularities (holes or roughness). If the substrate is very absorbent, it must be moistened before applying, If there is a particularly hot and dry climate and if the wall is very absorbent, it must be moistened before applying.
WARNINGS: Do not apply to substrates that are frozen, thawing or with frost risk in the 24 hours after applying.
Do not apply directly, without appropriate treatment on: gypsum substrates (gypsum-based plaster, plasterboard etc.), plastic coatings, previously painted or varnished substrates.