Product:
Fine grain smoother for interiors and exteriors
Used for smoothing for interiors and exteriors of multiple types of substrate as: concrete, prefabricated elements or aerated concrete (using an alkali-resistant glass fibre mesh between the first and second coat), plastic coatings, EPS, EPW and MW insulating panels and lime/cement based cured plaster.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [HQ-PL-RAS178]
- HIGH QUALITY
- POWDERS AND STUCCO
- smoothing
- Rev.: 4.0 - 14/12/2021
Can be mixed with water.
Keep in a dry and ventilated place. The product, sealed in the original package keeps for a period of one year.
Any package residue must be disposed of, according to local regulations in force.
Consumption is around 1.3 kg. m² per 1 mm of thickness.
Use at ambient temperatures between 5°C and 30°C.
CYCLE: Mix with a low speed mixer, adding about 28% of water until a homogenous mixture is obtained, leave to rest for around 10 minutes, remix without adding any other water and proceed with the application. Apply with a metal spatula, being careful to distribute the material evenly on the surface. Normally only one application is necessary, but if the surface is very irregular, it could be necessary to apply a second one. The second coat must be applied at a distance of about 60 minutes from the first, inserting an alkali resistant glass fibre mesh between the two layers. Particular environmental conditions may modify the time between the two coats.
WARNINGS: Temperature from + 5°C to + 35°C. In the summer period, protect the finish from quick drying with appropriate protection. Do not apply to substrates that are frozen, thawing or with frost risk in the 24 hours after applying.
- barcodeformatocolore
- 2000 g()
- 5000 g()
- dim. mm(PxLxH)pz.imballo
- xx10
- xx4
