Product:
Special acrylic paint for cement and fibre-cement roofs.
Based on acrylic resins, select pigments that are light resistant, fine crystalline fillers and specific additives that give the film strong weather-resistance and excellent elasticity.
Suitable for finishing and protecting cement and fibre-cement roofs that are exposed even to the most severe weather conditions.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [IU-PS-APT185]
- IDEALI & UTILI
- SPECIAL PAINTS
- acrylic floors and roofs
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per pareti esterne di supporto minerale (Cat A/c) BA 40 gr/lt (2013) Acrilica per tetti max contains 40 gr/lt di VOC
Can be diluted with water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable primers, the product covers 8÷10 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3÷5 hours and can be painted over after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, high humidity, strong wind and direct sunlight.
CYCLE: On new substrates: make sure the surface is perfectly clean and dry. Proceed with applying a coat of "LACCA 1400RM" base coat. After at least 12 hours in excellent humidity and temperature conditions, apply the first coat of Acrilica per tetti. After at least 24 hours, apply the second coat of the Acrilica per tetti finish.
On old or previously painted substrates: check that the substrate is dry and clean. In the presence of peeling, cracking and dust, accurately clean the substrate by brushing, sanding or by pressure washing. When the substrate is perfectly clean, apply a coat of "LACCA 1400RM" base coat. After at least 12 hours in excellent humidity and temperature conditions, apply the first coat of Acrilica per tetti. After at least 24 hours, apply the second coat of the Acrilica per tetti finish.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 2500 ml(PFON100) Dark gray
- 2500 ml(PFON316) Black
- 2500 ml(PFON109) Brown
- 2500 ml(PFON163) Red Pompeii
- 15 lt(PFON100) Dark gray
- 15 lt(PFON316) Black
- 15 lt(PFON109) Brown
- 15 lt(PFON163) Red Pompeii
- dim. mm(PxLxH)pz.imballo
- 165x165x1602
- 165x165x1602
- 165x165x1602
- 165x165x1602
- 292x292x3301
- 292x292x3301
- 292x292x3301
- 292x292x3301
- barcodeformatocolore
- 2500 ml(PFON100) Dark gray
- 2500 ml(PFON316) Black
- 2500 ml(PFON109) Brown
- 2500 ml(PFON163) Red Pompeii
- 15 lt(PFON100) Dark gray
- 15 lt(PFON316) Black
- 15 lt(PFON109) Brown
- 15 lt(PFON163) Red Pompeii
