Buccia d’arancio

Continuous plastic coating with fine shiny textured effect

Based on acrylic resins in aqueous emulsion, titanium dioxide, organic and inorganic pigments and select additives.
For interior substrates of cement, two-coat plaster, wood, gypsum and plasterboard.

Catalog number
Commercial line
Sector
Type
Last revised
COV

[IU-RV-PLC194]
IDEALI & UTILI
COATINGS
continuous plastic
Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS
EU limit value VOC
(Directive 2004/42 EC)
Pitture per pareti esterne
di supporto minerale
(Cat A/c) BA 40 gr/lt (2013)
Buccia d’arancio
max contains 40 gr/lt di VOC

Can be diluted with water.

Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.

Consumption is of 1.0÷1.2kg/m²

The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.

The product is ready to use, but can be slightly diluted with water.

In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 4÷6 hours.

Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.

CYCLE: On new substrates: make sure the plaster has reached a curing of 28 days, check that the surface is dry, clean and free of dust or inconsistent parts. Apply a coat of "FIXCIPIR" acrylic fixative or "LACCA 140W" micro particle fixative. After at least 18 hours Buccia d’arancio can be applied.
On already painted substrates: accurately remove any old non-adherent paint from the substrate. In the presence of mould, it is recommended to previously treat the surface with "RISANMUR". Check that the wall is perfectly dry and dusted and proceed with the application of "FIXOXAN" fixative or "CIPIRFOND" coloured base fixative. After at least 18 hours, Buccia d’arancio can be applied.

WARNINGS: Mix the product well before use.

NOTE: Ideal ambient conditions: temperature: min. +8°C max. +30°C relative humidity <70%. Ideal substrate conditions: temperature: min. +5°C max. +30°C - humidity <10%. It is recommended to apply the product in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.

barcode
formato
colore
8012760701150
5000 g
(IDRV01) Off white
8012760701167
5000 g
(IDRV02) Gray stone
8012760701174
25 kg
(IDRV01) Off white
8012760701211
25 kg
(IDRV02) Gray stone

dim. mm(PxLxH)
pz.imballo
195x195x173
1
195x195x173
1
305x305x285
1
305x305x285
1

COLORS - series: IDRV

(Note: The color reproduction of this sample is purely indicative. For predictability rely solely on the original product)

IDRV01

Off white

IDRV02

Gray stone

Product:

(Nota: le informazioni sul prodotto sono continuamente aggiornate alle normative in vigore. Controllate che la documentazione eventualmente in vostro possesso sia riferita all'ultima revisione rilasciata per il prodotto.)

TECHNICAL DATA SHEET IMMAGINE PRODOTTO

Confezioni:

barcode
formato
colore
8012760701150
5000 g
(IDRV01) Off white
8012760701167
5000 g
(IDRV02) Gray stone
8012760701174
25 kg
(IDRV01) Off white
8012760701211
25 kg
(IDRV02) Gray stone