Product:
Transparent synthetic wood finish with waxed effect .
Alkyd resin base, added to special waxes and UV light absorbing components. Highly water repellent, protects wood from humidity and from the onset of degenerative processes of the wood.
Suitable for finishing wood surfaces, both indoors and outdoors.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [IU-IM-FNS203]
- IDEALI & UTILI
- PRIMERS AND FINISHES FOR WOOD
- synthetic finishes
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Vernici e impregnanti per legno per finiture interne/esterne (Cat A/e) BS 400 gr/lt (2013) Flatting effetto cera max contains 400 gr/lt di VOC
Can be diluted with white spirit. It cannot be mixed.
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces fittingly treated with a sealer and/or adequate bases, the product covers 8÷10 m²/lt for one coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use, can be applied with a spray and can be thinned with 8÷10% white spirit.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3÷5 hours and can be painted over after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: check that the surface is perfectly dry and free from oil and other impurities; it is advisable to previously apply a coat of "XILOTINTA" in the desired colour. After at least 24 hours, apply the first coat of Flatting effetto cera. After a further 24 hours, the second coat of the product can be applied.
On already painted old substrates: accurately clean the surface to be painted by sanding, dusting and repairing any imperfections in the wood. Apply the first coat of Flatting effetto cera and wait for at least 24 hours before applying the second coat.
WARNINGS: Mix the product well before and during use. To apply outdoors it is recommended to protect the treated surface from humidity and rain for at least 48 hours after applying the product.
- barcodeformatocolore
- 375 ml(FICE900) Colorless
- 750 ml(FICE900) Colorless
- 2500 ml(FICE900) Colorless
- dim. mm(PxLxH)pz.imballo
- 109x109x556
- 109x109x1106
- 165x165x1602
- barcodeformatocolore
- 375 ml(FICE900) Colorless
- 750 ml(FICE900) Colorless
- 2500 ml(FICE900) Colorless
