Synthetic anti-woodworm and anti-mould impregnating agent for wood.
Alkyd resin and transparent pigment based Impregnating agent for wood, with added anti-bacterial compounds and protective filters to break down UV light.
Suitable for all types of wood for interiors and exteriors, new or not varnished with oils, lacquers or other paint.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Impregnanti non filmogeni per legno (Cat A/f) BS 700 gr/lt (2013) Impregnante per legno al solvente max contains 700 gr/lt di VOC
It can be diluted with white spirit. It can be mixed with chart colours.
Store the product at temperatures no lower than 1°C out of direct sunlight.
The product covers 12÷14m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18÷24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: Make sure the substrate is perfectly dry, clean and without any impurities. Eliminate any little imperfections from the surface by sanding, and then apply the first coat of Impregnante per legno al solvente in the desired colour. If necessary, a second coat can be applied only after 4÷5 hours. After at least 18 hours, the finishing product can be applied.
It cannot be used on wood that has already been treated with any type of filmogenic finish.
WARNINGS: Mix the product well before and during use. To apply outdoors it is recommended to protect the treated surface from humidity and rain for at least 48 hours after applying the product.