Product:
Biocide agent based product, widely used in aqueous mixtures. It does not release formaldehyde.
Ideal for restoring walls, attacked by mould, before decorating with paint or continuous plastic coatings. Additive to increase the anti-mould strength of tempera and/or breathable paint for interiors.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [IU-FF-RMU217]
- IDEALI & UTILI
- PRIMERS AND TOPCOATS
- restoring for walls
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Primer fissanti (Cat A/h) BA 30 gr/lt (2013) Risanante muri degradati max contains 30 gr/lt di VOC
It can be diluted with water. It can be mixed with acrylic and/or vinyl wall paints and anti-mould additive: recommended dose is 200 ml every 10 litres of paint.
Store the product at temperatures no lower than 5°C out of direct sunlight, taking care to reclose partially used containers.
The product covers 8÷10 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use and must be applied on walls with the presence of mould before painting with water-based paint.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2 to 3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: Before treating the walls with Risanante muri degradati thoroughly clean all impurities or mould by sponge washing them.
WARNINGS: Keep the product out of reach of children. Do not contaminate food, drink or water courses. Do not throw any residue into drains.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- 4000 ml()
- dim. mm(PxLxH)pz.imballo
- 83x83x2406
- 135x190x2451
