Top quality synthetic enamel for quality lacquering indoors and outdoors
Very shiny alkyd enamel with added silicone to enhance even the exceptional resistance to abrasion. The shine and the colours remain intact in their initial characteristics for a very long time. The workability of the product is excellent in the different application conditions.
For top quality painting outdoor and perfect lacquering indoor on substrates as: metal, wood, walls etc.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture monocomponenti ad alte prestazioni (Cat A/i) BS 500 gr/lt (2013) Smalto extrabrillante max contains 500 gr/lt di VOC
It can be diluted with white spirit. It can be mixed with chart colours.
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷7m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush or roller, dilute at 5÷7%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18÷24 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new wood, wall and plasterboard substrates: check that the surface is perfectly clean. Apply a coat of "SOTTOSMALTO" base coat or "FIBRONITE". After at least 24 hours in normal environmental conditions, the first coat of Smalto extrabrillante can be applied. After no less than 24 hours and however, not before the first coat is completely dry, apply the second coat of Smalto extrabrillante.
On metal substrates or products: clean and remove any traces of rust, degrease the surface and then apply a coat of "ANTIRUGGINE" anti-rust or "OXIDCROM". After at least 24 hours in normal environmental conditions, the first coat of Smalto extrabrillante can be applied. After no less than 24 hours and however, not before the first coat is completely dry, apply the second coat of Smalto extrabrillante.
WARNINGS: Mix the product well before use.