Product:
Powdered mixture of refractory mortar
For masonry and plastering of chimneys and furnaces in the combustion chamber, as well as for fixing refractory tiles. Particularly suitable for pre-assembling groups of tiles.
The tiles do not need to be previously wetted.
When laying the tiles use as little water as possible.
The setting process may be disturbed by too high or too low temperatures.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [AS-PL-MLT031]
- ANGELSTUCK
- POWDERS AND STUCCO
- mortar and sand
- Rev.: 4.0 - 14/12/2021
Can be mixed with water.
Keep the place dry and ventilated. The product, sealed in its original package keeps for a period of 1 year.
With 1 cm thickness, it covers 1 m² per 10 kg of product.
Any package residue must be disposed of, according to local regulations in force.
Mix with a quantity of clean water until you obtain a homogeneous, fluid mixture without lumps.
Working time, 15 minutes.
Use at ambient temperatures between 5°C and 30°C.
CYCLE: The substrate must be dry, consistent and free of dust and dirt.
After you have obtained a homogeneous mixture, apply the adhesive with the trowel on the refractory clay or ceramic tile.
The mortar can be applied with the trowel in layers from 2 to 30 mm thickness.
Do not mix with other products.
WARNINGS: Contains cement/hydrated calcium and therefore is an irritant. Protect eyes during use.
- barcodeformatocolore
- 1000 g()
- 5000 g()
- dim. mm(PxLxH)pz.imballo
- 135x62x18510
- 200x125x2652
