Product:
Powder filler for exteriors
White cement based filler with selected fine fillers and specific resins for exteriors.
For repairing cracks, small holes on exterior surfaces. Adheres to concrete, two-coat plaster, rough plaster and brick.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [AS-PL-STC032]
- ANGELSTUCK
- POWDERS AND STUCCO
- fillers and glues
- Rev.: 4.0 - 14/12/2021
Mix with water. The product cannot be mixed with other products.
Keep the place dry and ventilated. The product, sealed in the original package keeps for 1 year.
Approximately 1 kg of product is needed per 1 m² of surface and 1 mm of thickness.
Any package residue must be disposed of, according to local regulations in force.
Mix with a low-speed helical whip mixer, adding water to the filler in the percentage of around 27%, until a homogeneous paste is obtained.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 4÷6 hours.
Use at ambient temperatures between 5°C and 30°C.
CYCLE: Accurately clean the surface to fill, removing any flaky plaster. Make sure the surface is free of traces of oil and grease and that it is dusted.
WARNINGS: Do not apply to substrates that are frozen, thawing or with frost risk in the 24 hours after applying.
Do not apply at temperatures over 35°C, when it is windy or raining.
- barcodeformatocolore
- 1000 g()
- 5000 g()
- dim. mm(PxLxH)pz.imballo
- 135x62x18510
- 200x125x2652
