Product:
Water repellent, breathable paint for interiors.
Acrylic resin based breathable paint for interiors in aqueous emulsion, fine crystalline and amorphous fillers, rutile titanium dioxide and anti-bacterial components.
On all interior walls of cement, gypsum, plasterboard and plaster, on which you wish to maintain a high level of breathability and good resistance to mould formation.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [AM-ID-TRA325]
- AMBIENTI
- WATER-BASED PAINTS
- breathable interior
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) Traspirante bianco max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colourants or with the "ChròmaSystem" colouring system.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 5÷6m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3÷5 hours, can be painted over after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: after accurately cleaning the surface, it is recommended to apply a coat of "FIXCIPIR" fixative, diluted with water in the ratio of 1 part of "FIXCIPIR" and 3 parts water.
On previously painted walls: clean the surface well, removing any old peeling paint or that is not perfectly adherent and then proceed with the application of a coat of "FIXCIPIR" fixative, diluted with water in a ratio of 1 to 3 parts.
Once the base preparation is concluded, after at least 12 hours the first coat of Traspirante bianco can be applied, ad after a further 18 hours, the second one.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 13 lt()
- dim. mm(PxLxH)pz.imballo
- 305x305x2771
