Synthetic paint for cement flooring
Synthetic resin and chlorinated rubber based with pigments and fine fillers, wear-resistant to service traffic, whether by pedestrians or by trolleys. It is important to make sure the floor to be painted is perfectly clean, dry, dusted and without stains of oil, old paint or solvents.
Specifically for interior cement flooring.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture monocomponenti ad alte prestazioni (Cat A/i) BS 500 gr/lt (2013) Antiacida per pavimenti max contains 500 gr/lt di VOC
Can be diluted with nitro thinner. The product cannot be mixed.
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The product covers 8÷10 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 5÷7%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3÷5 hours, can be painted over after 24 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in excessive humidity, aeration of the premises during and after application.
CYCLE: On new flooring: the concrete casting must have cured for at least 28 days before applying "Antiacida per pavimenti. Make sure the surface is perfectly dry, without any traces of oil, grease and impurities and is dusted. Proceed with the application of the first coat of paint, thinned with nitro thinner (about 8÷10%). After at least 24 hours have passed in normal weather conditions (20°C and 60% relative humidity), the second coat can be applied.
WARNINGS: Mix the product well before use.