Product:
Top quality continuous plastic coating with shiny fine textured effect.
For interior substrates of cement, two-coat plaster, wood, gypsum and plasterboard.
Acrylic resin based in aqueous emulsion, titanium dioxide, organic and inorganic pigments and select additives.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [PR-RV-PLC330]
- PROFESSIONALE
- COATINGS
- continuous plastic
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per pareti esterne di supporto minerale (Cat A/c) BA 40 gr/lt (2013) CipirLux max contains 40 gr/lt di VOC
Can be diluted with water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
Consumption is of 1÷1.2 kg/m².
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use, but can be slightly diluted with water.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 4÷6 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: make sure that the plaster has reached a curing of at least 28 days, check that the surface is dry and clean, without any dust or inconsistent parts. Apply a coat of "FIXCIPIR" acrylic fixative or "LACCA 140W" micro particle fixative.
After at least 18 hours proceed with the application of CipirLux.
On already painted substrates: accurately remove old paint that does not adhere to the substrate.
In the case of mould, it is recommended to previously treat the surface with "RISANMUR".
Check that the wall is perfectly dry and dusted and apply the "FIXCIPIR" fixative or "LACCA 140W" fixative and after at least 18 hours CipirLux can be applied.
WARNINGS: Mix the product well before use.
NOTE: Ideal ambient conditions: temperature: min. +8°C max. +30°C relative humidity <70%. Ideal substrate conditions: temperature: min. +5°C max. +30°C - humidity <10%. It is recommended to apply the product in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 5000 g()
- 10000 g()
- 20 kg()
- dim. mm(PxLxH)pz.imballo
- 195x195x1731
- 220x220x2031
- 305x305x2851
- barcodeformatocolore
- 5000 g()
- 10000 g()
- 20 kg()
