Product:
Continuous plastic coating with a scratched effect
Based on acrylic resins in aqueous emulsion, quartz silica powder, quartz granules, select pigments and additives that give excellent resistance to atmospheric agents and strong colour stability over time.
For finishing interior and exterior walls of two-coat plaster, gypsum, concrete and wood.
Available in M1, M2 and M3 thicknesses
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [PR-RV-PLC339]
- PROFESSIONALE
- COATINGS
- continuous plastic
- Rev.: 4.0 - 14/12/2021
Can be diluted with water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
Consumption depends on the particle size: type M1: 2.0÷2.3kg/m² type M2: 2.5÷3.0kg/m² type M3: 3.7÷4.2kg/m²
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use, but can be slightly diluted with water.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 4÷6 hours, can be painted over after 24 hours and is dry in depth after at least 48 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates, make sure the plaster has reached a curing of 28 days, check that the surface is dry, clean and free of dust or inconsistent parts. Apply a coat of "FIXCIPIR" water-based fixative, diluted with water in the ratio of 1 part product with 5 parts water. Let at least 12÷18 hours pass and then apply of Graffiato coating.
On already painted or damaged substrates: proceed with accurately removing old paint that does not adhere to the substrate and any other non-adherent parts. In the presence of mould, it is recommended to treat the walls with "RISANMUR".Once you have checked that the wall is perfectly dry and dusted, proceed with the application of "LACCA 140W" fixative or in the event of stained, dark or chromatically non-uniform walls, it is recommended to fix with "CIPIRFOND" coloured coating.
After at least 12÷18 hours, apply Graffiato.
WARNINGS: Mix the product well before use.
NOTE: Ideal ambient conditions: temperature: min. +8°C max. +30°C relative humidity <70%. Ideal substrate conditions: temperature: min. +5°C max. +30°C - humidity <10%. It is recommended to apply the product in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 10000 g()
- 10000 g()
- 25 kg()
- 25 kg()
- dim. mm(PxLxH)pz.imballo
- 220x220x2031
- 220x220x2031
- 292x292x3301
- 292x292x3301
- barcodeformatocolore
- 10000 g()
- 10000 g()
- 25 kg()
- 25 kg()
