Product:
Clinging primer base, filler, to even out and connect old and new bases in cement, concrete, plaster, gypsum and plasterboard.
Composed of selected styrene-acrylic resin and fine silica. Applied as a primer coat on walls that are particularly smooth. It creates excellent adhesion for subsequent applications of finishing products.
Used to prepare bases in gypsum or plasterboard, skim and roughcast finishes, before applying paint and/or continuous acrylic coatings, both for interiors and exteriors.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [PR-FF-SAC353]
- PROFESSIONALE
- PRIMERS AND TOPCOATS
- acrylic substrates
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per pareti esterne di supporto minerale (Cat A/c) BA 40 gr/lt (2013) Ponte adesivo max contains 40 gr/lt di VOC
Can be diluted with water. The product cannot be mixed
Store the product at temperatures no lower than 5°C out of direct sunlight.
On surfaces treated with sealers and/or suitable primers, the product covers 8÷10 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% To apply with a wool roller, dilute at 15÷20%
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 1÷2 hours and can be painted over after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: accurately clean the surface, apply a first coat of "LACCA 140W", after around 6÷8 hours you can apply a coat of Ponte adesivo in a suitable manner to obtain the desired effect.
On old substrates: brush, fill and dust the surface well, then proceed in applying the fixative "LACCA 140W" or "LACCA 1400RM" depending on the state of the substrate. Wait for at least 6÷8 hours before applying Ponte adesivo with the appropriate dilution and manner to obtain the desired effect.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 14 lt()
- dim. mm(PxLxH)pz.imballo
- 305x305x2851
