Silicone-synthetic impregnating agent for walls.
Solvent based silicone resin paint. Penetrates into the pores of the treated surface, making it water repellent without altering its breathability and appearance.
Protects from humidity, dirt and mould, two-coat plaster, reinforced concrete, stone coatings and exposed brick. Water and atmospheric agent resistant, making the substrate water repellent and therefore protects it from corrosion.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Primer fissanti (Cat A/h) BS 750 gr/lt (2013) SilcoFas max contains 750 gr/lt di VOC
Can be diluted with nitro thinner. The product cannot be mixed.
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable primers, the product covers 8÷10 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: Can only be applied on substrates that have never been treated with other products. The surface to be treated must be dry without any oil or grease stains and be clean and dusted.
WARNINGS: Mix the product well before use.