StiroInt

Washable styrene-acrylic paint for interiors

For interior surfaces of cement, gypsum, plasterboard and two-coat plaster.
Top quality styrene-acrylic paint that gives the treated surfaces a satin appearance and strong wash resistance. Accurately formulated, extremely easy to apply and excellent yield.

Catalog number
Commercial line
Sector
Type
Last revised
COV

[PR-ID-STI370]
PROFESSIONALE
WATER-BASED PAINTS
styrol
Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS
EU limit value VOC
(Directive 2004/42 EC)
Pitture opache per pareti
e soffitti interni
(Cat A/a) BA 30 gr/lt (2013)
StiroInt
max contains 30 gr/lt di VOC

Can be diluted with water. Can be mixed with CIPIR colourants.

Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.

On surfaces treated with sealers and/or suitable bases, the product covers 5÷6 m²/lt for two coats.

The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.

To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 15÷20% for the first coat and 10÷15% for the second.

In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours, can be painted over after 24 hours and is dry in depth after at least 48 hours.

Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.

CYCLE: On new substrates: make sure the surface to be painted is perfectly dry, clean and cured for a period of 28 days in normal temperature and relative humidity conditions. Proceed with a coat of "FIXCIPIR" fixative and after at least 6 hours, apply the first coat of StiroInt. After 24 hours, the second coat of the product can be applied.
On already painted substrates: accurately clean the surface, removing any traces of old peeling paint, fill cracks and small imperfections with "MASTICFAS" and then apply a coat of "FIXCIPIR" fixative. After at least 6 hours, apply the first coat of StiroInt. After 24 hours, the second coat of the product can be applied.

WARNINGS: Mix the product well before use.

NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.

barcode
formato
colore
8012760001755
17 lt
()

dim. mm(PxLxH)
pz.imballo
292x292x364
1

Product:

(Nota: le informazioni sul prodotto sono continuamente aggiornate alle normative in vigore. Controllate che la documentazione eventualmente in vostro possesso sia riferita all'ultima revisione rilasciata per il prodotto.)

TECHNICAL DATA SHEET IMMAGINE PRODOTTO

Confezioni:

barcode
formato
colore
8012760001755
17 lt
()

IMMAGINE ARTICOLO