Production paints since 1962 : we color the world with the look to the future.

Product:

Guaina liquida per coperture

Elastomeric membrane for roofs.

Styrene-acrylic resin based in an aqueous emulsion with fine particles and additives that give it high resistance to abrasions and atmospheric agents. Resistant to washing and is waterproof.
Suitable for waterproofing and protecting terraces with tar coverings, concrete balconies, concrete roof tiles, fibre-cement roofs.

  • Catalog number
  • Commercial line
  • Sector
  • Type
  • Last revised
  • COV
Guaina liquida per coperture

CYCLE: On new cement, plaster and concrete substrates: make sure the substrate is cured, clean and dry and proceed with applying the base treatment with "LACCA 1400RM". After 24 hours, the first coat of Guaina liquida per coperture can be applied. After a further 24 hours apply the second coat.
On already painted substrates: accurately clean the surface by removing any old flaky paint. Apply a coat of "LACCA 1400RM". After 24 hours, the first coat of Guaina liquida per coperture can be applied. After a further 24 hours apply the second coat of the product.
In the event that the surfaces to be treated have cracks or holes, even little ones, you must repair them with slurry and/or seal then, before applying Guaina liquida per coperture.

WARNINGS: Mix the product well before use. To apply outdoors it is recommended to protect the treated surface from humidity and rain for at least 48 hours after applying the product.

NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.

CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.

Guaina liquida per coperture
  • dim. mm(PxLxH)
    pz.imballo
  • 108x108x127
    6
  • 108x108x127
    6
  • 108x108x127
    6
  • 108x108x127
    6
  • 108x108x127
    6
  • 108x108x127
    6
  • 108x108x127
    6
  • 211x211x210
    1
  • 211x211x210
    1
  • 211x211x210
    1
  • 211x211x210
    1
  • 211x211x210
    1
  • 211x211x210
    1
  • 211x211x210
    1
  • 302x302x312
    1
  • 302x302x312
    1
  • 302x302x312
    1
  • 302x302x312
    1
  • 302x302x312
    1
  • 302x302x312
    1
  • 302x302x312
    1
Guaina liquida per coperture
COLORS - series: PFON
(Note: The color reproduction of this sample is purely indicative. For predictability rely solely on the original product)
PFON107
Giallo ossido
Yellow oxide
PFON111
Verde bottiglia
Bottle green
PFON300
Bianco
Off white
PFON102
Grigio perla
Pearl gray
PFON316
Nero
Black
PFON109
Marrone
Brown
PFON117
Rosso inglese
English red
Guaina liquida per coperture
Product:
(Nota: le informazioni sul prodotto sono continuamente aggiornate alle normative in vigore. Controllate che la documentazione eventualmente in vostro possesso sia riferita all'ultima revisione rilasciata per il prodotto.)
Confezioni: