Anti-rust basecoat with alkyd resins, long oil, zinc phosphate and rust inhibiting inorganic pigments.
Suitable to use on ferrous metal surfaces to protect from corrosion and rust.
Apply after accurately cleaning the surface to be treated through brushing or sanding.
It creates a barrier between the surface of the metal and the external environment.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture monocomponenti ad alte prestazioni (Cat A/i) BS 500 gr/lt (2013) OxidCrom rapida essiccazione max contains 500 gr/lt di VOC
Can be diluted with nitro solvent. The product cannot be mixed.
Store the product at temperatures no lower than 1°C out of direct sunlight.
The product covers 6÷8 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 5÷7%. To apply with a wool roller, dilute at 7÷8%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3 to 5 hours and can be painted over after 24 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new non-painted objects: clean any traces of grease or oil. Remove any rust by brushing or sanding. Apply a coat of OxidCrom rapida essiccazione. After at least 24÷36 hours, apply another coat if retained necessary of OxidCrom rapida essiccazione. After a further 24÷36 hours, you can apply the first coat of enamel finish in the desired colour.
Already painted objects: accurately clean the substrate, removing any rust or old flaky paint, clean the scraped surface and apply OxidCrom rapida essiccazione.
WARNINGS: Mix the product well before use.