Washable and waterproof acrylic enamel with a satin effect for interiors, with ecologic pigments and additives.
Practically odourless and can be also used in closed and poorly ventilated areas without causing the formation of noxious or annoying vapours and odours.
Suitable to use on all types of interior surfaces, as long as they are perfectly clean and dry. On new or never painted surfaces, it is recommended to apply a preparation coat of "SOTTOSMALTO" or "CIPIRFOND" before applying Smalto coprente satinato.
Can be diluted with water. Can be mixed with the chart colours.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷7m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is generally ready to use but if it is necessary to reduce the viscosity in certain cases (as on new and/or particularly absorbent walls), it can be diluted up to 5÷7% for application with a brush, up to 7% for application with a roller and up to 8÷10% for application with a spray. In any case, do not exceed 15%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: make sure the substrate is dry, clean and free of impurities; previously treat the surface with a coat of "CIPIRFOND" sealer or in the case of a particularly rough substrate, a coat of "SOTTOSMALTO". After at least 8 hours, the first coat of Smalto coprente satinato can be applied. The second coat can be applied after a further 18 hours.
On already painted walls: accurately clean the surface, remove any traces of old flaky paint or that does not adhere to the substrate and treat the wall with "CIPIRFOND" sealer or "SOTTOSMALTO". After 8 hours, apply the first coat of Smalto coprente satinato and the second one can be applied after a further 18 hours.
WARNINGS: Mix the product well before use.
NOTE: Ideal ambient conditions: temperature: min. +8°C max. +30°C relative humidity <70%. Ideal substrate conditions: temperature: min. +5°C max. +30°C - humidity <10%. It is recommended to apply the product in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.