Product:
Water-based odourless acrylic base coat for wood and ecologic walls
Preparation for interior substrates in wood, wood fibre, two-coat plaster walls, gypsum and plasterboard. Used before applying gloss, satin and matt acrylic enamel finishes.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GA-FF-SAC495]
- GAIA
- PRIMERS AND TOPCOATS
- acrylic substrates
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per finiture e tamponature da int/est per legno metallo plastica (Cat A/d) BA 130 gr/lt (2013) Antiruggine H2O max contains 130 gr/lt di VOC
Can be diluted with water. The product cannot be mixed
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷8m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 5%. To apply with a wool roller, dilute at 7%. To apply with a spray, dilute at 10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 30 minutes and can be painted over after 18÷24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: Before applying the product, make sure the surface to be treated is perfectly clean, dusted and dry before applying a coat of Antiruggine H2O.
On old and already painted substrates: accurately clean the substrate, also if there is any old flaky paint, by brushing or sanding. After proceed with the application of a coat of Antiruggine H2O.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- 2500 ml()
- dim. mm(PxLxH)pz.imballo
- 109x109x1106
- 165x165x1602
