Product:
Thick coat finish for a matter effect or fine coat for a sand effect.
Decorative product used as a thick coating or as normal paint to obtain particular effects on the treated surface.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GD-DE-DEF519]
- GAIA DECORAZIONE
- DECORATION
- effects
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per effetti decorativi (Cat A/l) BA 200 gr/lt (2013) Feeling max contains 200 gr/lt di VOC
Ready to use if used for the matter effect. Dilute with maximum 5÷10% water for a sand effect.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The sand effect covers: 6÷8 m²/l The matter effect covers: 1.5÷2.5 m²/l
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Use the tools indicated based on the effect you intend to obtain.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 1÷4 hours. Completely dry after 24÷48 hours depending on the thickness.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: Prepare the substrate "FONDO DI BASE" following the product instructions.
Matter effect: mix the product without diluting it, apply Feeling with a honeycomb roller (for textured paint). The product must be applied thickly (1÷2 mm) to create a matter effect. Start applying from the top corner of the wall and apply a strip of about one metre of Feeling, on the entire wall.
After treat with a spatula for decorative effects to create the desired movements and imperfections. If there is not sufficient thickness in some areas, use a brush to produce the missing material. Once the surface is decorated, apply another vertical strip and follow the same application method until the work is finished.
Sand effect: dilute with 10% clean water and apply Feeling with a shorthaired roller. Proceed as in normal painting starting from the top corner of the wall and applying the product, crossing the passage of the roller. This effect can be created only on smooth and even substrates.
Colouring: the surface decorated with Feeling will be white and to colour it, you must treat it with "VELATURA LUC." or "VELATURA SAT." in the many shades of the decorative colour chart or even neutral to give a washable consistency to Feeling.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- 4000 ml()
- dim. mm(PxLxH)pz.imballo
- 109x109x1106
- 215x215x1941
