Product:
Breathable finish for indoors based on special multicolour flakes that create a particular visual effect.
It gives the base colour more brilliance and fullness. It is applied to walls treated with the decorative product and on all walls coloured with water-based paint.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GD-DE-DEF522]
- GAIA DECORAZIONE
- DECORATION
- effects
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per effetti decorativi (Cat A/l) BA 200 gr/lt (2013) Finitura glitter multicolore max contains 200 gr/lt di VOC
Ready to use. Can be diluted with maximum 5% water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Use a brush and make crisscross brushstrokes to position the glitter evenly on the substrate.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 1÷2 hours. To touch: 4÷6 hours. Totally dry after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: After preparing the substrate with "FONDO DI BASE" following the specific application cycle, proceed with applying of the decorative.
Finish: apply one coat of Finitura glitter multicolore working in a crisscross pattern to position the glitter evenly on the substrate.
WARNINGS: Mix well before applying.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- dim. mm(PxLxH)pz.imballo
- 120x120x1256
