Product:
Water based acrylic finish with prestigious metallic effects, applicable in two layers.
Indicated for plaster, premixed, flat and smooth gypsum and plasterboard surfaces.
The refined research of colours, shades and application versatility, ensure excellent aesthetic results in interior decoration.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GD-DE-DEF523]
- GAIA DECORAZIONE
- DECORATION
- effects
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per effetti decorativi (Cat A/l) BA 200 gr/lt (2013) Nuance Hi-Tech max contains 200 gr/lt di VOC
Can be diluted with maximum 15÷20% water. Can be mixed with specific colourants for decoration.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 8-12m²/lt for each coat. Coverage however varies according to the type of substrate and the application technique used.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Use a brush to apply and the decorative tools you wish to use for the effect you wish to obtain.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 2÷4 hours. Completely dry after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: After preparing the substrate with "FONDO DI BASE", following the specific application cycle, proceed with applying Nuance Hi-Tech.
Application with a brush: apply a coat with crisscross brushstrokes, avoiding well-defined areas until the brush is dry. Dip the brush in the paint again and start from an untreated area until you reach the already treated one, always with crisscross brushstrokes.
Application with a woollen glove, pad or sponge: dampen the chosen tool with water and squeeze so it does not drip on the surface to be treated and then dip it directly into the product. Apply the product onto the surface with circular movements or based on your own taste. Repeat until you create the desired effect.
If you have a work break, finish the area you are working on by arriving at a corner or edge of the surface, to avoid any flaws. The quantity of the material applied and the work process will determine the final aesthetic effect.
WARNINGS: Mix well before applying.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml(GANUNU01) Silver
- 750 ml(GANUNU02) Gold
- 4000 ml(GANUNU01) Silver
- 4000 ml(GANUNU02) Gold
- dim. mm(PxLxH)pz.imballo
- 109x109x1106
- 109x109x1106
- 215x215x1941
- 215x215x1941
- barcodeformatocolore
- 750 ml(GANUNU01) Silver
- 750 ml(GANUNU02) Gold
- 4000 ml(GANUNU01) Silver
- 4000 ml(GANUNU02) Gold
