Semi-transparent washable satin acrylic finish for interiors
Allows you to recreate exclusive and personalized effects by using different tools.
The versatile application guarantees excellent aesthetic results in interior decoration. Designed to respect the environment, odourless, perfectly washable and has good resistance to impact and abrasion. With universal colourants you can create a trendy and modern ambient.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per effetti decorativi (Cat A/l) BA 200 gr/lt (2013) Effetto nuvolato max contains 200 gr/lt di VOC
Ready to use. Can be diluted with a maximum of 5÷15% water. Can be mixed with specific colourants for decoration.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 8-12m²/lt for each coat. Coverage however varies according to the type of substrate and the application technique used.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Use a brush or roller for the taking off technique, before the process with a specific tool (cloth, pad, sponge ) to obtain the desired effect. For the putting on technique, use the specific tool directly.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 1÷2 hours. Completely dry after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: After preparing the substrate with "FONDO DI BASE", following the specific application cycle, proceed with the application of Effetto nuvolato.
Taking off technique: apply Effetto nuvolato evenly, with a brush or roller starting from the top corner of the room, working in vertical strips of around one metre over the entire height. Immediately after, decorate the surface with the chosen decorative tool. Continue in this manner until the entire surface to be decorated is completed.
Putting on technique: dip the chosen decorative tool, previously moistened, into Effetto nuvolato (in the case of the sponge effect, it is recommended to apply a thin layer of product on a rigid, non-absorbent substrate and dip the sponge) and create the effect on the substrate. Continue in this manner until the entire surface to be decorated is completed.
Effetto nuvolato can be coloured according to your choice, by choosing from among the colours on the decorative colour chart. Mix well before applying.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.