Acrylic finish for eco-compatible interiors, allows you to create a sought after, high prestige decorative effect, where the shades are the result of a simple application.
It has good resistance to abrasion and stains and is applied on any type of support that are adequately treated.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per effetti decorativi (Cat A/l) BA 200 gr/lt (2013) Antiche emozioni max contains 200 gr/lt di VOC
Ready to use. Can be diluted with maximum 0-15% water. Can be mixed with specific colourants for decoration.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6-10m²/lt for each coat. Coverage however varies according to the type of substrate and the application technique used.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Use a brush or a shorthaired roller and a soft smoothing spatula.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 1÷2 hours. Completely dry after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: After preparing the substrate with "FONDO DI BASE", following the specific application cycle, proceed with the application of Antiche emozioni.
With a brush, apply Antiche emozioni onto the wall, starting from the top corner of the room, working in vertical strips of around one metre over the entire height, trying to apply Antiche emozioni with irregular movements.
After about 20 minutes, stop applying the product with the brush and then with the spatula, treat the worked surface, pressing lightly on the parts in relief.
To avoid unsightly marks, always leave a 7÷8 cm vertical strip, without working it with the spatula, therefore creating a join between the processes.
Proceed by starting from the edge to the coating of the join with a dry brush to avoid evident joins.
Antiche emozioni can be coloured according to your choice, by choosing from among the colours on the decorative colour chart.
WARNINGS: Mix well before applying.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.