Product:
Transforms rust into an antioxidant.
It does not contain solvents, is applied directly onto rust and blocks corrosion.
Transforming the rust into an antioxidant compound makes the substrate weather resistant and waterproof to moisture.
It prevents rust from forming on rustless surfaces.
It can be painted over with any type of paint.
It does not need to be diluted and is directly applied onto the surface to be treated and on contact with rust it turns a black colour.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [LP-FF-SSF550]
- LINEA PIÙ
- PRIMERS AND TOPCOATS
- synthetic substrates specific for iron
- Rev.: 4.0 - 14/12/2021
CYCLE: Before applying the product, remove any flaking paint or non-anchored rust.
New surfaces must be accurately degreased with suitable products.
It can be applied with a brush, but the product must be shaken before use.
Do not pour into metal containers.
Two coats are recommended, the second one at least 30 minutes after the first.
Do not paint over before at least 12 hours after treating so that it completely dries and no later than 36÷48 hours, making sure that during this period, the treated part remains sheltered from water.
WARNINGS: Pour the product a little at a time into the container used for the application, as any residual product must not be put back into the original tin.
Irritant for eyes, respiratory tract and skin. Avoid contact with eyes and skin. If it should come into contact with eyes or skin, wash immediately and thoroughly with water and consult a doctor. Keep out of the reach of children.
- barcodeformatocolore
- 1000 ml()
- dim. mm(PxLxH)pz.imballo
- 90x90x2206
