CIPIR - product

Acrylic-siloxane clinging primer base, filler, to even out and connect old and new bases in cement, concrete, plaster, gypsum and plasterboard.

Composed of selected ccrylic-siloxane resin and fine silica. Applied as a primer coat on walls that are particularly smooth. It creates excellent adhesion for subsequent applications of finishing products.
Used to prepare bases in gypsum or plasterboard, skim and roughcast finishes, before applying paint and/or continuous acrylic coatings, both for interiors and exteriors.

Catalog number
Commercial line
Sector
Type
Last revised
COV

[BM-FF-SAC061]
BRICOMAN
PRIMERS AND TOPCOATS
acrylic substrates
Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS
EU limit value VOC
(Directive 2004/42 EC)
Pitture per pareti esterne
di supporto minerale
(Cat A/c) BA 40 gr/lt (2013)
BigWork - Fondo collegamento
max contains 40 gr/lt di VOC

Can be diluted with water. The product cannot be mixed

Store the product at temperatures no lower than 5°C out of direct sunlight.

On surfaces treated with sealers and/or suitable primers, the product covers 8÷10 m²/lt for each coat.

The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.

To apply with a brush, dilute at 15÷20% To apply with a wool roller, dilute at 15÷20%

In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 1÷2 hours and can be painted over after 24 hours.

Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.

CYCLE: On new walls: make sure the surface is completely dry, clean and dust-free. New surfaces must be left to mature for at least 4 weeks. Apply the ﬁrst coat. After at least 6-8 hours drying in normal environmental conditions, you can apply a second coat of BigWork - Fondo collegamento. On pre-painted surfaces: clean the surface thoroughly, remove old peeling paint, ﬁll imperfections. Apply the ﬁrst coat in diluted form as per the instructions. After at least 6-8 hours drying in normal environmental conditions, you can apply a second coat.

WARNINGS: Mix the product well before use.

NOTE: Ideal environmental conditions: temperature: min. +8°C - max +30°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.

barcode
formato
colore
8012760222051
25 lt
()

dim. mm(PxLxH)
pz.imballo
365x365x380
1

Product:

(Nota: le informazioni sul prodotto sono continuamente aggiornate alle normative in vigore. Controllate che la documentazione eventualmente in vostro possesso sia riferita all'ultima revisione rilasciata per il prodotto.)

TECHNICAL DATA SHEET IMMAGINE PRODOTTO

Confezioni:

barcode
formato
colore
8012760222051
25 lt
()

IMMAGINE ARTICOLO