Product:
Ultra-fine silky synthetic enamel
Very high covering power and top quality select lacquering for interiors and exteriors and can be used on wood, metal or walls and has a satin finish.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [PR-SM-SIN632]
- PROFESSIONALE
- ENAMELS
- synthetic
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture monocomponenti ad alte prestazioni (Cat A/i) BS 500 gr/lt (2013) Smalto PO93 lucido max contains 500 gr/lt di VOC
It can be diluted with white spirit. It can be mixed with chart colours.
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 10÷12 m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush or roller, dilute at 5÷7%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18÷24 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new wood, wall and plasterboard substrates: check that the surface is perfectly clean. Apply a coat of "CIPIRFOND" base coat or "FIBRONITE". After at least 24 hours in normal environmental conditions, the first coat of Smalto PO93 lucido can be applied. After no less than 24 hours and however, not before the first coat is completely dry, apply the second coat of Smalto PO93 lucido.
On metal substrates or products: clean and remove any traces of rust, degrease the surface and then apply a coat of "OXIDCROM" anti-rust or "ANTIRUGGINE". After at least 24 hours in normal environmental conditions, the first coat of Smalto PO93 lucido can be applied. After no less than 24 hours and however, not before the first coat is completely dry, apply the second coat of Smalto PO93 lucido.
WARNINGS: Mix the product well before use.
- barcodeformatocolore
- 2500 ml(CRAL7043) Gray
- 2500 ml(CRAL8014) Dark brown
- 2500 ml(CRAL6016) Green
- 2500 ml(CRAL300) Off white
- dim. mm(PxLxH)pz.imballo
- 165x165x1602
- 165x165x1602
- 165x165x1602
- 165x165x1602
- barcodeformatocolore
- 2500 ml(CRAL7043) Gray
- 2500 ml(CRAL8014) Dark brown
- 2500 ml(CRAL6016) Green
- 2500 ml(CRAL300) Off white
