Product:
Waxed effect water based finish for wood
Resin acrylic and special wax base, highly water repellent and UV light resistant.
Finish for wood surfaces with a satin aspect and waxed effect.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GA-IM-FNA635]
- GAIA
- PRIMERS AND FINISHES FOR WOOD
- acrylic finishes
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Vernici e impregnanti per legno per finiture interne/esterne (Cat A/e) BA 130 gr/lt (2013) Finitura effetto cera all'acqua max contains 130 gr/lt di VOC
Can be diluted with water. The product cannot be mixed
Store the product at temperatures no lower than 5°C out of direct sunlight, taking care to reclose partially used containers.
On surfaces fittingly treated with a sealer and/or adequate bases, the product covers 8÷10 m²/lt for one coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 5÷7% To apply with a spray, dilute at 5÷7%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: accurately clean the surface to be treated by sanding, apply the first coat of Finitura effetto cera all'acqua. Proceed with the second coat only after at least 18 hours.
WARNINGS: Mix the product well before and during use. To apply outdoors it is recommended to protect the treated surface from humidity and rain for at least 48 hours after applying the product.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- 2500 ml()
- dim. mm(PxLxH)pz.imballo
- 109x109x1106
- 165x165x1602
- barcodeformatocolore
- 750 ml()
- 2500 ml()
- immagine non disponibile
- immagine non disponibile