Product:
Tempera paint for interiors
Tempera paint composed of vinyl resins and amorphous and crystalline carbonates, suitable to use indoors on new surfaces and on previously painted surfaces.
Suitable on two-coat plaster, gypsum and plasterboard.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GA-ID-TEM645]
- GAIA
- WATER-BASED PAINTS
- distemper for internal
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) Tempera max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colourants.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 4÷5m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: clean the surface by sanding, check that the wall is dry and after applying a coat of water-based fixative sealer "FIXCIPIR", apply the first coat of Tempera. After at least 6 hours, the second coat can be applied.
On already painted walls: clean the surface by removing any old flaky paint or that is not perfectly adherent to the wall, apply a coat of fixative sealer "FIXCIPIR" and after at least 4 hours, and apply the first coat of Tempera. After at least another 6 hours, apply the second coat.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 4000 ml()
- 14 lt()
- dim. mm(PxLxH)pz.imballo
- 215x215x1941
- 302x302x2701
