Product:
Washable acrylic paint for interiors and exteriors.
Acrylic paint for interiors and exteriors, with high white content and good washable characteristics. It gives the treated surface an excellent semi-matt appearance.
Used for interiors and exteriors on all types of plaster and gypsum.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [BM-ID-LAV646]
- BRICOMAN
- WATER-BASED PAINTS
- washable to internal and/or external
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) BigWork - Lavabile max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colourants or with the "ChròmaSystem" colouring system.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 5÷6m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 12÷16 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: make sure the plaster has reached a curing of at least 28 days in normal environmental temperatures and relative humidity. Check that the surface is perfectly dry and clean and apply a coat of "LACCA 140W" fixative. After at least 8 hours, proceed with the first coat of BigWork - Lavabile. After at least 24 hours, the second coat can be applied.
On old and already painted substrates: accurately clean the surface, removing any old peeling paint, fill or repair the parts of ruined plaster and then apply a coat of "LACCA 1400RM" fixative (outdoors) or "LACCA 140W" (indoors). After at least 8 hours, proceed with applying the first coat of BigWork - Lavabile, and then finish with the second coat after 24 hours.
WARNINGS: Mix the product well before use. To apply outdoors, it is recommended to protect the surface from humidity and the rain for at least 48 hours after applying the product.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 25 lt()
- dim. mm(PxLxH)pz.imballo
- 365x365x3801
