Product:
Water-based washable, concealing acrylic finish. Ideal for indoors with an aspect that is enriched with shaded areas in a rustic style.
It allows you to obtain surfaces with particular contrasts of light, to enhance both classic and modern ambients, in line with the most current trends in interior decoration. Suitable for plasters, premixed products, gypsum and plasterboard surfaces.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [GD-DE-DEF650]
- GAIA DECORAZIONE
- DECORATION
- effects
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per effetti decorativi (Cat A/l) BA 200 gr/lt (2013) Metall - Silber max contains 200 gr/lt di VOC
Ready to use. Can be diluted with maximum 0-5% water. Can be mixed with specific colourants for decorative coatings.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces fittingly treated with insulation and/or adequate substrates, the product covers 20 m²/lt for one coat. Coverage however varies according to the type of substrate and the application technique used.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Use a Spalter brush with crisscross strokes or a shorthaired roller.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 1÷2 hours. To touch: 4÷6 hours. Totally dry after 24 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: After preparing the substrate with "FONDO DI BASE" following the specific application cycle, proceed with applying Metall - Silber.
Brushed effect: apply two coats of the product, dipping the brush in Metall - Silber and painting a coat with crisscross brushstrokes over the prepared surface, avoiding well defined areas
Carry on until you reach the just treated part with a dry brush, to avoid any evident or unsightly joins.
WARNINGS: Mix well before applying.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- 2500 ml()
- dim. mm(PxLxH)pz.imballo
- 133x133x1106
- 202x202x1341
