Washable water-based odourless enamel for interiors and exteriors
Suitable to use on all types of interior surfaces, as long as they are perfectly clean and dry. On new or never painted surfaces, it is recommended to apply a preparation coat of CipirFond or sottosmalto before applying Smalto murale all'acqua.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture lucide per pareti e soffitti interni (Cat A/b) BA 100 gr/lt (2013) Smalto murale all'acqua max contains 100 gr/lt di VOC
Can be diluted with water. Can be mixed with the chart colours.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷7m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is generally ready to use but if it is necessary to reduce the viscosity in certain cases (as on new and/or particularly absorbent walls), it can be diluted up to 5÷7% for application with a brush, up to 7% for application with a roller and up to 8÷10% for application with a spray. In any case, do not exceed 15%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 8°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: make sure the substrate is dry, clean and free of impurities; previously treat the surface with a coat of sottosmalto sealer or in the case of a particularly rough substrate, a coat of CipirFond. After at least 8 hours, the first coat of Smalto murale all'acqua can be applied. The second coat can be applied after a further 18 hours.
On already painted walls: accurately clean the surface, remove any traces of old flaky paint or that does not adhere to the substrate and treat the wall with sottosmalto sealer or CipirFond. After 8 hours, apply the first coat of Smalto murale all'acqua and the second one can be applied after a further 18 hours.
WARNINGS: Mix the product well before use.
NOTE: Ideal ambient conditions: temperature: min. +8°C max. +30°C relative humidity <70%. Ideal substrate conditions: temperature: min. +5°C max. +30°C - humidity <10%. It is recommended to apply the product in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.