Product:
Breathable styrene-acrylic paint for interiors.
Top quality styrene-acrylic paint that gives the treated surfaces a satin appearance and strong breathability. Accurately formulated, extremely easy to apply and excellent yield.
For interior surfaces of cement, gypsum, plasterboard and two-coat plaster.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [BO-ID-TRA682]
- BRICOOK
- WATER-BASED PAINTS
- breathable interior
- Rev.: 4.0 - 15/12/2021
Can be diluted with water. Can be mixed with CIPIR colourants or with the "ChròmaSystem" colouring system.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 5÷6m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3÷5 hours and can be painted over after 24 hours.
Use at ambient temperatures between 8°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE:
On new walls: make sure the substrate is clean and perfectly dry and then proceed in applying the first coat of fixative. After at least 12÷18 hours, the first coat of Traspirante super coprente can be applied. After 24 hours, the application can be completed with the second coat of Traspirante super coprente.
On gypsum and plasterboard: after checking that the surface is dry and clean, as well as appropriately filled and prepared, a first coat of covering fixative, diluted with maximum 15÷20% water can be applied. After at least 12÷18 hours, the first coat of Traspirante super coprente can be applied. After 24 hours, the application can be completed with the second coat of Traspirante super coprente.
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 5000 ml()
- 14 lt()
- dim. mm(PxLxH)pz.imballo
- 211x211x2101
- 305x305x2851
