Satin-finished white enamel, HACCP certified, specifically for indoor surfaces in presence of food (kitchens, hotels, bars, restaurants) and for surfaces subject to splashing water.
White enamel for interiors with excellent washability and coverage, ideal for protecting walls from splashes, washes and abrasion.
It has a good resistance to common household detergents and is therefore the ideal solution for application on surfaces adjacent to hobs, washbasins, showers, as well as for environments with presence of foodstuffs or which require long-lasting protection from scratches.
Suitable for coverings on new or pre-treated civil interior plasters with old paint, plaster and plasterboard and fine smoothing and panels for false ceilings.As regards the tests carried out, the enamel for water in food environments (cod.000117), is a painting system suitable for environments with presence of food, according to the UNI 11021.2002 HACCP standard - test report n ° 544-A / 2017
The VOC content was lower than 20.2 g/l
The aromatic VOC content was lower than 0.01% (m/m)
Dilution and cleaning of tools with water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The content of 750ml is sufficient for 3.5 square meters for two coats of application and depending on the absorption of the support.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush or roller, dilute at 5÷7%. To apply with a spray, dilute at 8÷10%.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
WARNINGS: APPLICATION INSTRUCTIONS
Environmental conditions
• temperature: min. +8 ° C; max +30 ° C
• relative humidity: <70%
Support conditions
• temperature: min. +5 ° C; max +30 ° C
• humidity: <10%
It is recommended to apply the product in favorable climatic conditions as indicated above.
The application of the product carried out in unsuitable atmospheric conditions negatively affects drying times, compromising the achievement of aesthetic and performance characteristics.
Do not apply on fresh and basically alkaline substrates, wait for an adequate period of maturation. (generally four weeks)
Use in a well-ventilated place.
The producer guarantees that the information is provided to the best of his experience and technical and scientific knowledge; however, it cannot assume any responsibility for the results obtained as the application conditions are beyond its control.