Product:
Whiteboard painting allows you to transform any wall or wooden surface into a traditional blackboard where you can write with normal chalks and erase easily.
Lavagna painting looks opaque just like a traditional blackboard and can be used on masonry and wood walls. It is advisable to previously treat the surface with a bonding fixative.
Just like a classic blackboard, it can be cleaned using a normal eraser or any fabric and, for total cleaning, it is also possible to use a damp cloth.
Whiteboard paint is a water-based product ready for use.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [AM-ID-SPE687]
- AMBIENTI
- WATER-BASED PAINTS
- special internal and/or external
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) Pittura lavagna max contains 30 gr/lt di VOC
Ready to use. Can be diluted with maximum 7% water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The content of 750ml is sufficient for 3.5 square meters for two coats of application and depending on the absorption of the support.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Different tools can be used for the application. The wool roller may be simpler to obtain a smooth and uniform surface. Spread with crossed passes.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 2÷4 hours. To touch: 12÷18 hours. Totally dry after 72 hours.
Use at ambient temperatures between 8°C and 35°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: make sure the substrate is perfectly dry and then proceed in applying the first coat of "FIXCIPIR" fixative. After at least 12÷18 hours, the first coat of the product can be applied. After a further 24 hours, the application can be completed with the second coat of Pittura lavagna.
On gypsum and plasterboard: after checking that the surface is dry and clean, as well as appropriately filled and prepared, a first coat of "FIXCIPIR" covering fixative, diluted with maximum 15÷20% water can be applied. After at least 12÷18 hours, the first coat of Pittura lavagna can be applied. After a further 18 hours, the application can be completed with the second coat of Pittura lavagna.
Wait at least 72 hours (3 days) to use the treated surface as a blackboard so that it is dried in depth and is not compromised by the use of chalks.
WARNINGS: Stir effectively before use until the contents of the can suggest the presence of deposits of the heavier components of the product on the bottom.
EUH208 Contains: 2-BUTANONE OXIME - May cause an allergic reaction.
EUH210 Safety data sheet required
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- dim. mm(PxLxH)pz.imballo
- 109x109x1106
