Product:
It allows you to transform any wall or wooden surface into a blackboard with an attractive power to magnets where you can attach sheets of paper, photographs, notices and post-its with the help of small magnets.
Magnetic Paint has an opaque appearance just like a traditional blackboard and can be used on masonry and wood walls. It is advisable to previously treat the surface with a bonding fixative.
To obtain a good result, apply 3 or even 4 layers of product. Overlap the passages at a distance of at least 6 ÷ 12 hours between one layer and another. It is recommended to shake for a few minutes before starting work and keep the product agitated to avoid the precipitation of metal particles on the bottom of the package.
Chalkboard paint is a ready-to-use water-based product.The product is not harmful and is low in VOC as required by European regulations. It is applied with several layers depending on the attractive force that is desired.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [AM-ID-SPE689]
- AMBIENTI
- WATER-BASED PAINTS
- special internal and/or external
- Rev.: 4.0 - 14/12/2021
Ready to use. Can be diluted with maximum 5% water.
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
The content of 750ml is sufficient for 3.5 square meters for two coats of application and depending on the absorption of the support.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Different tools can be used for the application. The wool roller may be simpler to obtain a smooth and uniform surface. Spread with crossed passes.
In normal temperature conditions (22°C) and relative humidity (60%), dust-free time: 2÷4 hours. To touch: 12÷18 hours. Totally dry after 72 hours.
Use at ambient temperatures between 8°C and 35°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new walls: make sure the substrate is clean and perfectly dry. Proceed with the first pass of fixative. After at least 12 ÷ 18 hours, the first coat of product can be applied. After 6 ÷ 12 hours it can be completed with the application of the next coat of Pittura Magnetica.
On gypsum and plasterboard: after checking that the surface is dry and clean, as well as adequately grouted and prepared, the first coat of covering fixative adequate diluted to a maximum of 15 ÷ 20% with water can be applied.
After at least 12 ÷ 18 hours, the first coat of Pittura Magnetica can be applied. After another 18 hours, the cycle can be completed with the application of the subsequent coats of Pittura Magnetica.
Wait at least 48 hours (2 days) to use the treated surface so that it is dried in depth and not only on the surface.
WARNINGS: Stir effectively before use until the contents of the can suggest the presence of deposits of the heavier components of the product on the bottom.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- dim. mm(PxLxH)pz.imballo
- 108x108x1276
