Product:
The product combines the qualities of acrylic insulating fixative for interiors with those of the restoring action of wide-range biocidal agents in an aqueous mixture.
Ideal for restoring walls attacked by molds, before decorating with paints or continuous plastic coatings, adequately prepares the substrate ensuring an excellent final painting result.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [AM-FF-RMU691]
- AMBIENTI
- PRIMERS AND TOPCOATS
- restoring for walls
- Rev.: 4.0 - 20/12/2021
It can be diluted with water. It can be mixed with acrylic and/or vinyl wall paints and anti-mould additive: recommended dose is 200 ml every 10 litres of paint.
Store the product at temperatures no lower than 5°C out of direct sunlight, taking care to reclose partially used containers.
The product covers 8÷10 m²/lt for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The product is ready to use and must be applied on walls with the presence of mould before painting with water-based paint.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2 to 3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 8°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: Before treating the walls with Fissa&Risana thoroughly clean all impurities or mould by sponge washing them.
Internal walls already painted: carefully clean the wall, removing any parts of old flaking paint by scraping.
Overcoat only when completely dry.
WARNINGS: Keep the product out of reach of children. Do not contaminate food, drink or water courses. Do not throw any residue into drains.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 750 ml()
- dim. mm(PxLxH)pz.imballo
- 83x83x2406
