Product:
Smoothing paste filler for walls and wood
High filling power, can be sanded and is elastic. It is a white paste and is applied with a spatula. The drying rate depends on the thickness of the layer applied and the absorption capacity of the treated surface. In normal temperature and humidity conditions and if the thickness is within 1 mm, it is completely dry in approximately 2 ÷ 3 hours.
Due to its characteristics it is therefore suitable for repairing any kind of surface imperfection such as: concrete, cement, plaster and masonry in general, wood, stone, plasterboard and expanded polystyrene.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- [AS-PL-STP693]
- ANGELSTUCK
- POWDERS AND STUCCO
- stucco paste
- Rev.: 4.0 - 14/12/2021
Store the product at temperatures no lower than 5°C out of direct sunlight, taking care to reclose partially used containers.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Ready to use product and does not require any dilution.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 5°C and 30°C. Suitable for use indoors.
CYCLE: Roll out the dough with the help of a spatula. Thanks to its microspheres, the stucco is very light and obtains the property of not cracking even in interventions of considerable thickness.
It leaves the smooth surface which generally does not require sanding and is ready for a fixative and insulating treatment before the further painting phase.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- 500 g()
- 1000 g()
- dim. mm(PxLxH)pz.imballo
- 85x85x806
- 110x110x926
