Product:
Two-pack aliphatic polyurethane topcoat
It is a high gloss and non-yellowing finish. It retains gloss and colour tone for a long time. It achieves excellent protection in heavy industrial and marine environments. It has excellent resistance to splash and spillage of acids, alkali and salt solutions, of aliphatic and aromatic solvents, emulsified oils, naphtha and gasoline. The hard, smooth and uniform film makes it particularly suitable for the coating of vehicles and industrial machinery, vehicle refinishing and agricultural machinery for the chemical and oil industry.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [PR-SM-SIN021]
- PROFESSIONALE
- ENAMELS
- synthetic
- Rev.: 4.2 - 30/08/2022
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) High performance two-component paints (Cat A/j) BS 500 gr/lt (2013) Smalto Poliuretanico max contains 500 gr/lt di VOC
Thinner F.200 – Code 400200
Shelf life
• 12 months part A, 6 months part B, with T max of 100°F, in sealed drum, indoors and protected against freeze.
Calculated coverage
• 7.4 m2/kg – 50 micron
Calculated consumption
• 135 g/m2 – 50 micron
Cleaning up
• Solvent immediately after use
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
Air spray - Thinning 0÷5 % v/v
Drying times at 68°F – 50% R.H.
• to touch 3-4 h
• to recoat 18 h
Environmental conditions
• Temperature: 40-120°F
• Relative humidity <75%
CYCLE: Surface preparation
• Apply Smalto Poliuretanico on epoxy primers and intermediates (EPOFARB ZPA, EPOFARB Z1HB, EPOFARB IM/200).
WARNINGS: Do not use during rain, fog and wind.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +35°C relative humidity<75%.
Ideal substrate conditions: temperature: min. +5°C - max +35°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.
- barcodeformatocolore
- dim. mm(PxLxH)pz.imballo
- barcodeformatocolore