Washable water-based styrene-acrylic paint for interiors
Top quality styrene-acrylic paint that gives the treated wall a semi-matt appearance and strong wash resistance. Accurately designed and formulated with resins, pigments mineral fillers and top quality additives, extremely easy to apply and excellent yield.
For interior surfaces and walls of cement, gypsum, plasterboard and two-coat plaster.
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture opache per pareti e soffitti interni (Cat A/a) BA 30 gr/lt (2013) Superior - lavabile max contains 30 gr/lt di VOC
Can be diluted with water. Can be mixed with CIPIR colouran
Store the product at a temperature, no lower than 5°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷7m²/lt for two coats.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
To apply with a brush, dilute at 15÷20% for the first coat and 10÷15% for the second. To apply with a wool roller, dilute at 20÷25% for the first coat and 15÷20% for the second. To apply with a spray, dilute at 25÷30% for the first coat and 20÷25% for the second.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 2÷3 hours and can be painted over after 18 hours.
Use at ambient temperatures between 10°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: Before starting to apply the product, make sure the surface is perfectly clean and dry. On already painted walls, it is advisable to remove any traces of old flaky paint or any that is not perfectly adherent to the walls. It is recommended to treat the surface to be painted with a previous coat of "LACCA 140W".
WARNINGS: Mix the product well before use.
NOTE: Ideal environmental conditions: temperature: min. +8°C - max +30°C relative humidity<70%.
Ideal substrate conditions: temperature: min. +5°C - max +30°C - humidity<10%.
It is recommended to apply the product in favourable climatic conditions as indicated.
Keep the product out of the reach of children.
in favourable climatic conditions as indicated. Applying the product in unsuitable environmental conditions, negatively affects the drying time, compromising the optimal result of both the aesthetic characteristics and its performance.
Do not apply on fresh and alkaline substrates; wait for it to cure (generally four weeks).
Use in a well-ventilated area.
CIPIR ensures that the information is provided to the best of its experience and technical-scientific knowledge; nevertheless, it cannot assume any responsibility for the results obtained as application conditions are beyond its control.